RIDGID Battery Adapters

They are the same class of battery, measured at two different moments. Five lithium cells in series read about 20V fresh off the charger with nothing drawing from them, and settle to about 18V once a tool is running. A brand that prints 20V is quoting the first figure and one that prints 18V is quoting the second. That is why an adapter between an "18V" platform and a "20V" platform works: there is no conversion to do.

Only RIDGID 18V batteries. RIDGID also sells RIDGID 18V RED, and those use a different socket — same brand, different rail and terminals, so they need their own adapter. Compare the sliding rail on your battery against the photos before ordering.

Use the selector at the top: pick the platform on the other side of the pair and it takes you straight to the one adapter that joins them. Every combination in that list is one we actually make, so if it is there, it exists.

Yes. Use the swap button next to the selector above and the page turns the search around, from RIDGID 18V tools back to the batteries that can run them.

No. The adapter carries current from the battery to the tool and does nothing else — there is no charging circuit inside it. Keep charging RIDGID 18V batteries on their usual RIDGID charger.

Used with undamaged, compatible equipment it is not expected to. RIDGID 18V batteries are lithium-ion with their own protection circuit built into the battery, and it keeps doing its job through the adapter. Stop when the tool noticeably slows rather than running the battery flat, and stop using the adapter if it becomes unusually hot or the contacts look damaged.

Usually. What matters is the socket, not the badge: if the battery slides onto a RIDGID 18V tool and locks the way an original does, the adapter will take it. Aftermarket batteries do vary in moulding, so if yours looks unusual send us a photo and we will check before you order.